Bissell SpinWave is a popular hard floor mop that is designed to make cleaning your floors a breeze. However, if you have been using this mop for a while, you may have noticed that it is not spraying water as it should. This can be frustrating, especially if you have a lot of floors to clean.
Fortunately, there are several things you can do to troubleshoot this issue. One of the most common reasons why the Bissell SpinWave is not spraying is because the clean water tank is empty or almost empty. Another possible cause is that the water tank is not seated in the mop correctly. If you are experiencing this issue, don’t worry, as there are several steps you can take to fix it.
In this article, we will explore the common causes of why your Bissell SpinWave is not spraying and provide you with the necessary steps to fix the issue. We will also provide you with some tips on how to properly maintain your SpinWave to prevent this issue from happening in the future. So, if you are tired of your SpinWave not spraying water, keep reading to find out how to fix this issue.
Possible Causes of Bissell SpinWave Not Spraying
If your Bissell SpinWave is not spraying, there could be several possible causes. Here are some of the most common reasons why your SpinWave may not be spraying and what you can do to fix it.
Dirty Water Tank or Clean Water Tank
If your SpinWave is not spraying, one possible cause could be a dirty water tank or a clean water tank that is not filled with enough water or formula. Make sure to empty the dirty water tank and fill the clean water tank with clean water and formula. If the tank is dirty, clean it thoroughly before refilling it.
Clogged Spray Tip
A clogged spray tip could also be the reason why your SpinWave is not spraying. To fix this, remove the spray tip and clean it thoroughly with warm water. You can also use a pin or a toothpick to remove any debris that may be blocking the spray tip.
Faulty Water Tank Cap
A faulty water tank cap could also cause your SpinWave to stop spraying. Check the cap and the tank for any cracks or damage. If you find any, you will need to order a new cap.
Damaged or Cracked Water Tank
If the water tank is damaged or cracked, it may not be able to hold water properly, which could result in reduced or no spray. Check the tank for any damage or cracks and replace it if necessary.
Faulty Spray Button or Trigger
A faulty spray button or trigger could also be the reason why your SpinWave is not spraying. Check the button or trigger and make sure it is functioning properly. If it is not, you may need to replace it.
Faulty Power Button
If the power button is faulty, your SpinWave may not turn on, which could result in reduced or no spray. Check the power button and make sure it is functioning properly. If it is not, you may need to replace it.
Faulty Valve, Pin or Damage in the Hose
A faulty valve, pin, or damage in the hose could also cause your SpinWave to stop spraying. Check the hose for any damage or blockages and replace it if necessary.
Faulty Pump
If the pump is faulty, your SpinWave may not be able to spray properly. Check the pump and make sure it is functioning properly. If it is not, you may need to replace it.
Out of Formula
If you are out of formula, your SpinWave will not be able to spray properly. Make sure to refill the clean water tank with clean water and formula.
Low Battery (for Cordless SpinWave)
If you have a cordless SpinWave, a low battery could be the reason why your SpinWave is not spraying. Charge the battery fully before using your SpinWave.
Bissell Connect App Issues (for SpinWave Robot)
If you are using the Bissell Connect App with your SpinWave Robot, make sure that it is connected properly and that there are no issues with the app. If you are having issues with the app, try restarting your phone or reinstalling the app.
By checking these possible causes, you should be able to identify and fix the issue with your SpinWave not spraying.
Troubleshooting Bissell SpinWave Not Spraying
If your Bissell SpinWave is not spraying, there could be several reasons why. Here are some troubleshooting steps you can take to get your SpinWave back to working condition.
Check the Water Tank and Spray Tip
The first thing to check when your SpinWave is not spraying is the water tank and spray tip. Make sure the water tank is properly filled with clean water and formula. Check the spray tip and clean it with a pin or small brush if it is clogged.
Check the Water Tank Cap
If the water tank cap is damaged or cracked, it can cause the SpinWave to not spray. Unscrew the cap and check for any damage. If there is damage, order a new cap and replace it.
Check the Spray Button or Trigger
Make sure the spray button or trigger is not stuck or damaged. Hold down the spray button for 10-15 seconds to ensure it is working properly.
Check the Power Button
Check to make sure the power button is turned on. If the SpinWave is not turned on, it will not spray.
Check the Valve
Make sure the valve inside the water tank cap is pushed in. If it is not pushed in, the SpinWave will not spray.
Check the Hose
Check the hose for any damage or kinks. If the hose is damaged or kinked, it can cause the SpinWave to not spray.
Check the Pump
If the pump is not working properly, it can cause the SpinWave to not spray. Make sure the pump is not clogged or damaged.
Check the Formula
If the formula is not mixed properly or is expired, it can cause the SpinWave to not spray. Make sure the formula is properly mixed and not expired.
Check the Battery (for Cordless SpinWave)
If you have a cordless SpinWave, check the battery. Make sure it is properly charged and not damaged.
Check the Bissell Connect App (for SpinWave Robot)
If you have a SpinWave Robot, check the Bissell Connect App. Make sure the app is properly connected to the SpinWave and there are no connectivity issues.
By following these troubleshooting steps, you should be able to get your Bissell SpinWave back to working condition.
How to Fix Bissell SpinWave Not Spraying
If your Bissell SpinWave is not spraying, there are a few things you can do to fix it. Here are some troubleshooting steps you can take:
Clean the Water Tank and Spray Tip
If your SpinWave is not spraying, the first thing you should do is check the water tank and spray tip. Make sure the tank is properly filled with clean water and formula. If the tank is dirty, clean it thoroughly. Similarly, if the spray tip is clogged, clean it with a small brush or toothbrush.
Replace the Water Tank Cap
If the water tank cap is damaged or cracked, it may cause the SpinWave to stop spraying. In this case, you should replace the cap with a new one.
Replace the Spray Button or Trigger
If the spray button or trigger is not working properly, it may cause the SpinWave to stop spraying. In this case, you should replace the button or trigger with a new one.
Replace the Power Button
If the power button is not working properly, it may cause the SpinWave to stop spraying. In this case, you should replace the power button with a new one.
Replace the Valve
If the valve is not working properly, it may cause the SpinWave to stop spraying. In this case, you should replace the valve with a new one.
Replace the Hose
If the hose is damaged or cracked, it may cause the SpinWave to stop spraying. In this case, you should replace the hose with a new one.
Replace the Pump
If the pump is not working properly, it may cause the SpinWave to stop spraying. In this case, you should replace the pump with a new one.
Refill the Formula
If the SpinWave is not spraying, it may be because the formula tank is empty. In this case, refill the formula tank with the appropriate solution.
Charge the Battery (for Cordless SpinWave)
If you have a cordless SpinWave, make sure the battery is fully charged. If the battery is low, charge it fully before using the SpinWave.
Reset the Bissell Connect App (for SpinWave Robot)
If you are using the SpinWave robot, and it is not spraying, try resetting the Bissell Connect App. This may help resolve the issue.
By following these steps, you can troubleshoot and fix most issues with the Bissell SpinWave not spraying.
Contacting Bissell for Assistance
When to Contact Bissell
If you are experiencing issues with your Bissell SpinWave not spraying, there are a few troubleshooting steps you can take to resolve the issue. However, if these steps do not work, or if you have any other questions or concerns, it may be time to contact Bissell for assistance.
How to Contact Bissell
Bissell provides several ways to get in touch with their customer support team. You can call their general product support line at 1-800-237-7691, Monday through Friday from 9am to 9pm ET, and Saturday from 9am to 8pm ET. For Wi-Fi connected product support, you can call 1-844-383-2630, Monday through Friday from 9am to 9pm ET, and Saturday and Sunday from 9am to 8pm ET.
You can also contact Bissell through their website by filling out a contact form or by using their live chat feature. Additionally, Bissell has an extensive FAQ section on their website that may answer many of your questions.
What Information to Provide to Bissell
When contacting Bissell for assistance with your SpinWave not spraying, it is important to have some information ready to provide to the customer support representative. This information may include:
- The model number of your SpinWave
- The serial number of your SpinWave
- A description of the issue you are experiencing
- Any troubleshooting steps you have already taken
Having this information ready can help the customer support representative quickly and efficiently assist you with resolving your issue.
In summary, if you have tried troubleshooting your Bissell SpinWave not spraying and are still experiencing issues, it may be time to contact Bissell for assistance. You can reach out to their customer support team through phone, live chat, or their website contact form. When contacting Bissell, be sure to have important information about your SpinWave ready to provide to the customer support representative.
Frequently Asked Questions
Why is my Bissell Spinwave not spraying water?
If your Bissell Spinwave is not spraying water, the first thing to check is the clean water tank. It may be empty or almost empty, so fill it up if necessary. Another possible cause is that the water tank is not seated in the mop properly. Make sure it is securely attached and try again. If these steps don’t work, there may be a problem with the spray tip or the cap, so check them for cracks or damage.
How do I reset my Bissell Spinwave?
To reset your Bissell Spinwave, unplug it from the wall and wait for a minute. Then, plug it back in and turn it on. This should reset the machine and clear any error messages.
How do you clean a Spinwave?
To clean your Spinwave, start by removing the dirty water tank and emptying it. Then, remove the mop pads and wash them in the washing machine. Wipe down the Spinwave with a damp cloth and let it dry before using it again.
How does Bissell Spinwave mop work?
The Bissell Spinwave mop uses a combination of rotating pads and cleaning solution to clean hard floors. The pads spin at high speed to scrub away dirt and grime, while the cleaning solution helps to loosen and dissolve stains.
What should I do if my Bissell Spinwave robot is not charging?
If your Bissell Spinwave robot is not charging, check to make sure that the charging contacts on the robot and the charging dock are clean and free of debris. If they are dirty, clean them with a dry cloth. If this doesn’t work, try resetting the robot by pressing and holding the power button for 10 seconds.
Why am I getting a pump error on my Bissell Spinwave?
If you are getting a pump error on your Bissell Spinwave, it may be caused by a clog in the pump or a problem with the pump motor. Try cleaning the pump and checking for any obstructions. If this doesn’t work, contact Bissell customer support for further assistance.
