Did you know that the first Miele vacuum was made in 1927?
It’s no wonder Miele is such a great brand! They have been around long enough to know how to build excellent vacuums, including this highly rated one!
However, just like any other machine, Miele vacuums can malfunction too, including their roller brushes.
If your Miele vacuum brush is not spinning, it may be due to the roller brush itself being clogged with debris or being broken. A broken belt could also be the culprit.
In this guide, I will help you troubleshoot the issue and walk you through fixing it.
Why Is My Miele Vacuum Brush Not Spinning?
As mentioned in the intro, a Miele vacuum brush roller can stop spinning for the following reasons:
- Debris stuck in the roller
- The brush roller is worn out
- The vacuum belt is broken
Stuck debris and a broken belt can both cause your Miele vacuum to overheat!
Whether your Miele Complete C2, Miele Complete C3, Miele Blizzard CX1, or Miele Classic C1 vacuum brush is not spinning, this guide will help you troubleshoot most models.
However, make sure you contact Miele if you need further assistance for your specific model.
How Do You Fix A Miele Vacuum Brush That Doesn’t Spin?
Follow the steps below to fix a Miele vacuum brush that does not spin.
Start with step 1 and stop if a particular step has helped you fix the issue:
1. Remove Any Lodged Debris
Check for any lodged debris that could prevent your Miele vacuum roller from spinning.
There may be long hair tangled around the roller brush, as well as small debris that got stuck on each side of the brush.
I recommend you consult the user manual of your specific Miele vacuum model, as it will tell you exactly how to remove the brush roll, clean it, and put it back.
However, the steps below will give you an idea of how you can proceed:
Step 1: Grab a screwdriver and take off the plastic lid located at the bottom of your Miele vacuum.
Step 2: Remove the roller.
Step 3: Grab a pair of scissors to cut through lodged hair and lint.
Step 4: Put the roller down on the floor in a vertical position.
Step 5: Use one hand to push the brush roll to the floor while rotating it with the other hand. This will allow you to evaluate whether the roller spins smoothly. If it doesn’t, the roller will need replacing.
2. Replace The Brush Roller
If your Miele vacuum roller fails to spin despite getting rid of all the debris, you may need to replace it.
Amazon does sell replacement brush roll for Miele vacuums, such as this one.
However, make sure you check your Miele vacuum manual to identify the exact name of your model.
Ordering the correct part is crucial!
Once you receive the new brush roller, follow these steps:
Step 1: Grab a screwdriver and take off the plastic lid located at the bottom of your Miele vacuum.
Step 2: Remove the old brush roll.
Step 3: Install the new roller brush, ensuring the belt is positioned correctly on the motor shaft and the roller.
Make sure you read the manufacturing instructions to see what steps to take for your specific model.
3. Replace The Belt
When excessive debris gets lodged in the brush roller, the vacuum has to work harder.
This results in extra tension on the belt, causing it to break or become too big to allow the brush roll to rotate correctly.
In this case, you will have to replace the belt, which, again, you can find on Amazon.
This one is pretty cheap, fits a few models and comes with two belts, just in case!
Again, please check your Miele vacuum manual to identify the exact name of your model.
This will enable you to order the correct belt for your vacuum.
Once you receive the new belt, follow these steps:
Step 1: Grab a screwdriver and take off the plastic lid located at the bottom of your Miele vacuum.
Step 2: Remove the brush roll.
Step 3: Remove the belt.
Step 4: Grab the new belt and attach one side to your Miele vacuum motor shaft.
Step 5: Stretch the belt over the correct side of the brush.
Step 6: Put the roller back in your vacuum.
Step 7: Close the lid and secure it with screws.
To help you further, here are the videos for two different Miele vacuum models:
How to Clean Miele Cat & Dog Turbo Brush:
How to Clean Miele Triflex roller brush:
How to Fix a Miele CX1 brush not spinning:
Do Miele Brush Rollers Wear Out?
Yes, Miele vacuum cleaner brushes wear out because they continuously rub against the carpet. Like a toothbrush, the vacuum cleaner roller bristles can flatten and get too soft, so you should replace vacuum cleaner brushes regularly.
When Should I Replace My Miele Vacuum Brush Roller?
On average, Miele vacuum brush rollers need replacing every 1-2 years. However, you may need to replace it more often if you use your Miele vacuum daily. Inspect the brush roll to see if the bristles are worn out and loose. That is a good indication that the vacuum brush roller needs changing.
Conclusion
There are so many reasons why your Miele vacuum brush may not be spinning. Troubleshooting is crucial to get your vacuum roller to spin again:
- Remove any lodged debris
- Replace the brush roller
- Replace the belt
Contact Miele consumer care for further assistance.
