If you have a carpet cleaner, you know how useful it can be for cleaning carpets, rugs, upholstery, and more.
But what if your Hoover carpet cleaner stops suctioning up water and dirt? This can be frustrating and make your cleaning job harder.
Fortunately, there are some simple steps you can take to troubleshoot and fix this problem.
In this blog post, we will show you how to fix a Hoover carpet cleaner that’s not suctioning, and what to do if none of the steps help 🙂
Hoover Carpet Cleaner Not Suctioning – Why and How To Fix It
The main reason why a Hoover carpet cleaner is not suctioning is because there is something blocking the air flow or water flow in the machine.
This could be due to:
- A full water tank
- A dirty or clogged filter
- A clogged nozzle
- A damaged or worn-out seal
- A broken hose or pump
To fix this issue, you need to check each of these parts and clean or replace them as needed.
Step 1: Empty and clean the water tank
If your Hoover carpet cleaner is not suctioning up water, one possible reason is that the water tank is full.
When it is full, the Hoover cleaner will automatically shut off to prevent any damage to the machine.
To empty the tank, simply remove it from the machine and pour out the water.
You should also rinse the tank with clean water and wipe it dry with a cloth.
Make sure the tank is properly attached to the machine before using it again.
Step 2: Clean the filters
One common issue that can cause a Hoover carpet cleaner to lose suction is a dirty filter.
If your cleaner’s filter is clogged, it won’t work as efficiently because the air flow will be restricted.
To clean the filter, simply remove it from the machine and rinse it off with water.
You should do this at least once a month to keep your cleaner working well.
Check your manual for specific instructions on how to access and clean these filters.
Step 3: Clean the nozzle
Another common issue is a clogged nozzle.
The nozzle is the part that sprays water and detergent onto the carpet and sucks up the dirty water.
Over time, debris and dirt can accumulate in the nozzle, hindering the proper flow of water into the recovery tank.
To clean the nozzle, simply remove it from the machine and rinse it off with water.
You can use a small brush or a toothpick to dislodge any stubborn dirt from the nozzle holes.
Step 4: Check the seals
The seals are rubber rings that create an airtight connection between different parts of the machine.
If these seals are damaged or worn out, they can cause air leaks that reduce suction power.
To check the seals, inspect them for any cracks, tears, or holes.
You should also make sure they are properly aligned and fitted onto their respective parts.
If you find any damaged or missing seals, you should replace them with new ones.
Step 5: Check the hose and pump
The hose and pump are responsible for delivering water and detergent to the nozzle and returning dirty water to your Hoover carpet cleaner tank.
If these parts are broken or leaking, they can affect suction performance as well.
To check the hose and pump, look for any signs of damage such as cracks, holes, kinks, or loose connections.
You should also make sure there are no blockages in the hose by running water through it. If you find any problems with these parts, you may need to replace them with new ones.
What If None Of These Steps Help?
If you have tried all of these steps and your Hoover carpet cleaner is still not suctioning up water and dirt, there may be a more serious problem with your machine that requires professional repair.
Before you contact Hoover for service, you should check if your carpet cleaner is still under warranty.
Most Hoover carpet cleaners come with a limited warranty that covers defects in materials and workmanship for a certain period of time.
You can find out more about your warranty by checking your manual or visiting Hoover’s website.
If your carpet cleaner is still under warranty, you can contact Hoover’s customer service department and arrange for repair or replacement of your machine.
You will need to provide proof of purchase and your model number when you contact them.
You can find their contact details on their website or on your manual.
If your carpet cleaner is not under warranty, you can still contact Hoover for service, but you may have to pay for the repair or replacement costs.
Alternatively, you can look for a local repair shop that specializes in carpet cleaners and see if they can fix your machine.
However, you should compare the cost of repair with the cost of buying a new carpet cleaner and decide which option is more economical and convenient for you.
Conclusion
I hope this blog post has helped you understand how to fix a Hoover carpet cleaner that’s not suctioning up water and dirt.
These simple steps can assist you in restoring your carpet cleaner’s suction power and make your cleaning job easier and faster again!
Remember to keep your Hoover carpet cleaner well maintained by regularly emptying the water tank, cleaning the filters, and checking for any damage or blockages.
This way, you can extend the life of your machine and enjoy its benefits for a long time 🙂
